dmesg - Intel Core 2 Quad Q9650
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.10-1.16-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable
BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe7dfff] ACPI data
BIOS-e820: [mem 0x00000000dfe7e000-0x00000000dfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000dfed0000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0DFF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000091000] 91000 size 24576
init_memory_mapping: [mem 0x00000000-0xdfe6ffff]
[mem 0x00000000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfe6ffff] page 4k
kernel direct mapping tables up to 0xdfe6ffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x21fffffff]
[mem 0x100000000-0x21fffffff] page 2M
kernel direct mapping tables up to 0x21fffffff @ [mem 0xdfe6a000-0xdfe6ffff]
RAMDISK: [mem 0x3419a000-0x360c4fff]
ACPI: RSDP 00000000000fb1e0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000dfe70000 0003C (v01 A_M_I_ OEMRSDT 06001011 MSFT 00000097)
ACPI: FACP 00000000dfe70200 00084 (v02 A_M_I_ OEMFACP 06001011 MSFT 00000097)
ACPI: DSDT 00000000dfe70440 0A990 (v01 A1098 A1098001 00000001 INTL 20051117)
ACPI: FACS 00000000dfe7e000 00040
ACPI: APIC 00000000dfe70390 0006C (v01 A_M_I_ OEMAPIC 06001011 MSFT 00000097)
ACPI: MCFG 00000000dfe70400 0003C (v01 A_M_I_ OEMMCFG 06001011 MSFT 00000097)
ACPI: OEMB 00000000dfe7e040 00081 (v01 A_M_I_ AMI_OEM 06001011 MSFT 00000097)
ACPI: HPET 00000000dfe7add0 00038 (v01 A_M_I_ OEMHPET 06001011 MSFT 00000097)
ACPI: OSFR 00000000dfe7ae10 000B0 (v01 A_M_I_ OEMOSFR 06001011 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x00000000-0x21fffffff]
NODE_DATA [mem 0x21ffec000-0x21fffffff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00096fff]
node 0: [mem 0x00100000-0xdfe6ffff]
node 0: [mem 0x100000000-0x21fffffff]
On node 0 totalpages: 2096631
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898728 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000097000 - 0000000000098000
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe7e000
PM: Registered nosave memory: 00000000dfe7e000 - 00000000dfed0000
PM: Registered nosave memory: 00000000dfed0000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s81856 r8192 d20544 u524288
pcpu-alloc: s81856 r8192 d20544 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066161
Policy zone: Normal
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Memory: 8157172k/8912896k available (5769k kernel code, 526372k absent, 229352k reserved, 5184k data, 992k init)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4049.875 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8099.75 BogoMIPS (lpj=4049875)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (32399.00 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdfe7e000-0xdfecffff] (335872 bytes)
RTC time: 21:44:14, date: 09/14/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xffffffff]
pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xfcfffc00-0xfcffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfcff8000-0xfcffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfcfff800-0xfcfffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 24: [mem 0xfcffe800-0xfcffefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfcfff400-0xfcfff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
pci 0000:01:00.0: reg 30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe8fc000-0xfe8fffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:04:00.0: [1415:c110] type 00 class 0x070102
pci 0000:04:00.0: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.0: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 20: [mem 0xfbff0000-0xfbffffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:05:00.0: [1102:0004] type 00 class 0x040100
pci 0000:05:00.0: reg 10: [io 0xe880-0xe8bf]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: [1102:7003] type 00 class 0x098000
pci 0000:05:00.1: reg 10: [io 0xec00-0xec07]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.2: [1102:4001] type 00 class 0x0c0010
pci 0000:05:00.2: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:05:00.2: reg 14: [mem 0xfebf8000-0xfebfbfff]
pci 0000:05:00.2: supports D1 D2
pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:05:01.0: [1033:00f2] type 00 class 0x0c0010
pci 0000:05:01.0: reg 10: [mem 0xfebfe000-0xfebfefff]
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:03.0: reg 10: [mem 0xfebff000-0xfebff7ff]
pci 0000:05:03.0: reg 14: [io 0xe800-0xe87f]
pci 0000:05:03.0: supports D2
pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xdff00000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x029f]
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x004d]
pnp 00:08: [io 0x0050-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x03ff disabled]
pnp 00:08: [io 0x0500-0x057f]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed50000-0xfed8ffff]
pnp 00:08: [mem 0xdff00000-0xdfffffff]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:08: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xffb00000-0xffbfffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0b: [mem 0xffc00000-0xffefffff]
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [io 0x0060]
pnp 00:0e: [io 0x0064]
pnp 00:0e: [irq 12]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0f: [mem 0xe0000000-0xefffffff]
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: [mem 0x00000000-0x0009ffff]
pnp 00:10: [mem 0x000c0000-0x000cffff]
pnp 00:10: [mem 0x000e0000-0x000fffff]
pnp 00:10: [mem 0x00100000-0xdfefffff]
pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0xdfefffff] could not be reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa000000-0xfa1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa200000-0xfa3fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfa1fffff]
pci 0000:00:1c.0: bridge window [mem 0xfa200000-0xfa3fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.0: enabling device (0105 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfa1fffff]
pci_bus 0000:04: resource 2 [mem 0xfa200000-0xfa3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xfa400000-0xfa5fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31916k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbe6a000-0xdfe69fff] (64MB) mapped at [ffff8800dbe6a000-ffff8800dfe69fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1379195054.361:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15994
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011600000, using 2560k, total 2560k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffe900 irq 44
ata2: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffe980 irq 44
ata3: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffea00 irq 44
ata4: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffea80 irq 44
ata5: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffeb00 irq 44
ata6: SATA max UDMA/133 abar m2048@0xfcffe800 port 0xfcffeb80 irq 44
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfcfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 2 using ehci_hcd
usb 1-3: New USB device found, idVendor=2040, idProduct=7200
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=10
usb 1-3: Product: WinTV HVR-950
usb 1-3: Manufacturer: Hauppauge
usb 1-3: SerialNumber: 4033453988
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-4: new high-speed USB device number 3 using ehci_hcd
usb 1-4: New USB device found, idVendor=054c, idProduct=01bd
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Silicon Media R/W
usb 1-4: Manufacturer: Sony
usb 1-4: SerialNumber: 00000011CA5A
usb 1-6: new high-speed USB device number 4 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 4049.999 MHz
Switching to clocksource tsc
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input0
usb 1-6: New USB device found, idVendor=046d, idProduct=0825
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-6: SerialNumber: ED49E510
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 2-2: new high-speed USB device number 3 using ehci_hcd
usb 2-2: New USB device found, idVendor=04a9, idProduct=1909
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: CanoScan
usb 2-2: Manufacturer: Canon
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=09ef, idProduct=3707
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: INport Hotwire
usb 6-1: Manufacturer: Xitel
ata5: SATA link down (SStatus 0 SControl 300)
usb 7-2: new full-speed USB device number 2 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:981:752
ata_link link3: hash matches
link3: hash matches
tty ttyS3: hash matches
rtc_cmos 00:03: setting system clock to 2013-09-14 21:44:17 UTC (1379195057)
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 364k freed
Freeing unused kernel memory: 108k freed
usb 7-2: New USB device found, idVendor=0cf3, idProduct=3000
usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
ata9.00: ATAPI: HP DVD Writer 1140d, YH26, max UDMA/66
ata9.00: configured for UDMA/66
scsi 8:0:0:0: CD-ROM HP DVD Writer 1140d YH26 PQ: 0 ANSI: 5
usb 8-1: new low-speed USB device number 2 using uhci_hcd
emc: device handler registered
rdac: device handler registered
hp_sw: device handler registered
alua: device handler registered
systemd-udevd[127]: starting version 195
md: bind
usb 8-1: New USB device found, idVendor=04f2, idProduct=0402
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Keyboard
usb 8-1: Manufacturer: Chicony
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.2-1/input0
md: bind
md: bind
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.2-1/input1
md: bind
md: bind
md: bind
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md126: md_size is 3907072000 sectors.
md: RAID0 configuration for md126 - 1 zone
ACPI: Invalid Power Resource to register!
md: zone0=[sda/sdb/sdc/sdd]
zone-offset= 0KB, device-offset= 0KB, size=1953536512KB
md126: detected capacity change from 0 to 2000420864000
md126: p1 p2 p3 p4 < p5 p6 >
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
async_tx: api initialized (async)
xor: automatically using best checksumming function:
generic_sse: 15076.000 MB/sec
raid6: sse2x1 6765 MB/s
raid6: sse2x2 8394 MB/s
raid6: sse2x4 11820 MB/s
raid6: using algorithm sse2x4 (11820 MB/s)
raid6: using ssse3x2 recovery algorithm
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
PM: Marking nosave pages: [mem 0x00097000-0x000fffff]
PM: Marking nosave pages: [mem 0xdfe70000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 259:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (md126p3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (md126p3): re-mounted. Opts: acl,user_xattr
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting System Time Synchronized.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
EXT4-fs (md126p3): re-mounted. Opts: acl,user_xattr
systemd-udevd[389]: starting version 195
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
Floppy drive(s): fd0 is 1.44M
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI parallel port detected: 1415:c000, I/O at 0xdc00(0xd880), IRQ 16
parport0: PC-style at 0xdc00 (0xd880), irq 16, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90011584000, 00:24:8c:6e:ff:57, XID 1c4000c0 IRQ 45
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
FDC 0 is a post-1991 82077
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sr 8:0:0:0: Attached scsi generic sg4 type 5
gameport gameport0: EMU10K1 is pci0000:05:00.1/gameport0, io 0xec00, speed 1044kHz
ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input5
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
firewire_ohci 0000:05:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device (046d:0825)
Initializing USB Mass Storage driver...
scsi10 : usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
au0828 driver loaded
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
firewire_ohci 0000:05:01.0: added OHCI v1.10 device as card 1, 4 IR + 4 IT contexts, quirks 0x1
firewire_ohci 0000:05:01.0: isochronous cycle inconsistent
ALSA patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4015e601
ALSA patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA patch_realtek.c:1244 SKU: enable_pcbeep=0x1
ALSA patch_realtek.c:1245 SKU: check_sum=0x00000005
ALSA patch_realtek.c:1246 SKU: customization=0x000000e6
ALSA patch_realtek.c:1247 SKU: external_amp=0x0
ALSA patch_realtek.c:1248 SKU: platform_type=0x0
ALSA patch_realtek.c:1249 SKU: swap=0x0
ALSA patch_realtek.c:1250 SKU: override=0x1
ALSA hda_auto_parser.c:318 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:326 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:327 mono: mono_out=0x0
ALSA hda_auto_parser.c:330 dig-out=0x11/0x1e
ALSA hda_auto_parser.c:331 inputs:
ALSA hda_auto_parser.c:335 Rear Mic=0x18
ALSA hda_auto_parser.c:335 Front Mic=0x19
ALSA hda_auto_parser.c:335 Line=0x1a
ALSA patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
ALSA patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
hda_intel: Disabling MSI
ALSA hda_intel.c:2713 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA hda_intel.c:1642 Enable delay in RIRB handling
ppdev: user-space parallel port driver
firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 2, 4 IR + 8 IT contexts, quirks 0x11
ALSA emufx.c:1569 Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P]
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
au0828: i2c bus registered
firewire_core 0000:05:00.2: created device fw0: GUID 00023c009104c320, S400
usbcore: registered new interface driver ath3k
firewire_core 0000:05:01.0: created device fw1: GUID 002011010410072c, S400
firewire_core 0000:05:01.0: created device fw2: GUID 00201101030010c8, S200
firewire_core 0000:05:01.0: phy config: new root=ffc1, gap_count=5
firewire_core 0000:05:01.0: IRM is not 1394a compliant, making local node (ffc0) root
firewire_core 0000:05:01.0: phy config: new root=ffc0, gap_count=5
tveeprom 0-0050: Hauppauge model 72001, rev B3F0, serial# 6922148
tveeprom 0-0050: MAC address is 00:0d:fe:69:9f:a4
tveeprom 0-0050: tuner model is Xceive XC5000 (idx 150, type 76)
tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 0-0050: audio processor is AU8522 (idx 44)
tveeprom 0-0050: decoder processor is AU8522 (idx 42)
tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
hauppauge_eeprom: hauppauge eeprom: model=72001
au8522 0-0047: creating new instance
au8522_decoder creating new instance...
tuner 0-0061: Tuner -1 found with type(s) Radio TV.
xc5000 0-0061: creating new instance
xc5000: Successfully identified at address 0x61
xc5000: Firmware has not been loaded previously
au8522 0-0047: attaching existing instance
firewire_core 0000:05:03.0: created device fw3: GUID 001e8c0001d591d7, S400
xc5000 0-0061: attaching existing instance
xc5000: Successfully identified at address 0x61
xc5000: Firmware has not been loaded previously
DVB: registering new adapter (au0828)
usb 1-3: DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)...
Registered device AU0828 [Hauppauge HVR950Q]
usbcore: registered new interface driver au0828
usb 7-2: USB disconnect, device number 2
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
firewire_core 0000:05:01.0: phy config: new root=ffc1, gap_count=5
scsi 10:0:0:0: Direct-Access Sony USB HS-CF Card 5.23 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg5 type 0
scsi 10:0:0:1: Direct-Access Sony USB HS-xD/SM 5.23 PQ: 0 ANSI: 0
sd 10:0:0:1: Attached scsi generic sg6 type 0
scsi 10:0:0:2: Direct-Access Sony USB HS-MS Card 5.23 PQ: 0 ANSI: 0
sd 10:0:0:2: Attached scsi generic sg7 type 0
scsi 10:0:0:3: Direct-Access Sony USB HS-SD Card 5.23 PQ: 0 ANSI: 0
sd 10:0:0:3: Attached scsi generic sg8 type 0
Adding 8388604k swap on /dev/md126p2. Priority:-1 extents:1 across:8388604k
sd 10:0:0:0: [sde] Attached SCSI removable disk
sd 10:0:0:1: [sdf] Attached SCSI removable disk
sd 10:0:0:2: [sdg] Attached SCSI removable disk
sd 10:0:0:3: [sdh] Attached SCSI removable disk
ALSA clock.c:228 4:3:2: cannot set freq 24000 to ep 0x86
usb 7-2: new full-speed USB device number 3 using uhci_hcd
ALSA clock.c:243 current rate 290 is different from the runtime rate 32000
ALSA mixer.c:887 5:2: cannot get min/max values for control 2 (id 5)
ALSA mixer.c:887 2:0: cannot get min/max values for control 2 (id 2)
usbcore: registered new interface driver snd-usb-audio
usb 7-2: New USB device found, idVendor=0cf3, idProduct=3005
usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
EXT4-fs (md126p6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (md126p5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-journald[357]: Received SIGUSR1
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x252 offMax=0x14b5
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16 (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
NET: Registered protocol family 17
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmmon[4065]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4065]: Module vmmon: initialized
[4081]: VMCI: shared components initialized.
[4081]: VMCI: host components initialized.
[4081]: VMCI: Module registered (name=vmci,major=10,minor=56).
[4081]: VMCI: Using host personality
[4081]: VMCI: Module (name=vmci) is initialized
fuse init (API version 7.20)
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
/dev/vmnet: open called by PID 4221 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 4282 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4285 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4350 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
userif-3: sent link down event.
userif-3: sent link up event.[ 38.347921] /dev/vmnet: open called by PID 4351 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4354 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=438 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=398
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=264 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=224
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=438 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=398
SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0224:8cff:fe6e:ff57 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0224:8cff:fe6e:ff57 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0224:8cff:fe6e:ff57 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0224:8cff:fe6e:ff57 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44